AR-15 Buttstocks & Parts

1 1/4" Quick Detach Push Button Sling Swivel. This sling swivel will attach to stocks and handguards.

Make your AR15 even lighter by adding on the feather light ARFX stock from ACE. The skeletonized design eliminates excess material while taking advantage of the inherent strength of the buffer tube. Includes all necessary hardware, including sling swivel. Uses a standard A1/A2 receiver extension tube, buffer and spring (not included ). 10.5" Long. Made In America!

AR-15 M16 M4 AR10 LR308 6 Position Commercial Buffer Tube with Castle Nut & Latch Plate. These will work with Magpuls commercial buffer tube size stocks. Made in the USA!

AR15 Milspec A1 & A2 Standard Rifle Buffer Spring

AR15 Milspec A2 Buttstock Assembly Complete. Includes: Buttstock with Buttplate Assembly Buffer Tube Buffer Spring Buffer Spacer Screw Made In America

AR15 Mil-Spec A1 & A2 buttstock buffer extension tube. This buffer extension tube is also used for the Magpul AR15 PRS stocks. Made in the USA!

AR-15 M16 AR-10 A2 Buttstock Spacer

AR15 Milspec A2 buttstock upper screw. Made in the USA!

AR15 Milspec carbine buffer assembly. For use with collapsible / short stock assemblies.

AR15 Milspec Buttstock Buffer Spring (Carbine) Approx. 10 5/8" long.

This steel sling adapter conveniently replaces the AR15 receiver end plate, giving you twice the mounting options on either side. Round holes will accept slings with quick-release snaps. This adapter will work on all M4 and standard collapsible stocks.

AR15 Carbine Stock Standard Latch Plate For Collapsible Stocks Made in the USA!

AR15 Spanner wrench for collapsible stock

AR-15 M4 Carbine Stock Castle Nut .375" Wide Steel Construction Made in the USA!

AR-15 Milspec A1 & A2 Rifle Buttstock Buffer Assembly. This buffer is used in full length buttstock not collapsible (short) stocks. Also used in Magpul's PRS stocks. Made in the USA!

AR-15 M16 M4 USGI 6 Position Collapsible Stock, complete with buffer and buffer spring. Includes M4 stock, receiver extention (buffer tube), end plate, castle lock nut, carbine buffer, and spring. These stocks will fit on any standard AR15, M4, M16 lower receiver. Made in the USA. Do not be fooled by the cheap Non-American made copies. These are the real ones!!

AR15 USGI 6 Position Collapsible Stock, complete with buffer and buffer spring. Includes M4 stock, receiver extention (buffer tube), end plate, castle lock nut, carbine buffer, and spring. These stocks will fit on any Milspec AR15, M4, M16 lower receiver. Made in USA. Do not be fooled by the cheap Non-American made copies. These are the real ones!! Color OD Green

The Magpul CTR (Compact/Type Restricted) Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized (1.17"dia) receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Commercial-Spec Model includes an extended 0.55" rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product Features: Mounts on commercial-spec sized (1.17"dia) carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, DoubleStar and others (please see the note below) Supplemental friction lock minimizes accuracy robbing wobble* Sloping cheek weld combines a slim profile with user comfort Shielded release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life Side mounting slots accept optional cheek risers for NON-AR15/M16 applications Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection Compatible with Magpul ASAP® and other receiver-mount sling attachments Sling Mounts: Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Rear/Bottom - 1.25" sling loops Toe - Lanyard hole for custom para-cord rigs NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec (1.15"dia) and commercial-spec(1.17"dia) . If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec CTR. Please see the "Related Info" section above to determine which tube you have. * Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality. The Magpul MOE Stock – Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Commercial-Spec Model includes an extended 0.55" rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product Mounts on commercial-spec sized (1.17"dia) carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, DoubleStar and others (please see the note below) Sloping cheek weld combines a slim profile with user comfort Shielded release latch prevents snagging and accidental operation Premium chrome-silicon lock spring provides positive locking and long service life Side mounting slots accept optional cheek risers for NON-AR15/M16 applications Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection Compatible with Magpul ASAP® and other receiver-mount sling attachments Sling Mounts Rear/Bottom - 1.25" sling loops Toe - Lanyard hole for custom para-cord rigs NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec (1.15"dia) and commercial-spec(1.17"dia) . If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec MOE. Please see the "Related Info" section above to determine which tube you have.