Magpul Industries

When installed on the base of a rifle or subgun magazine, the Magpul provides unsurpassed speed and ...

Unlike conventional vertical fore-grips, the Magpul AFG2 (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, the AFG2 helps mitigate recoil and control the weapon, facilitating faster, more accurate follow-up shots. The AFG2 is a slim line design that is shorter in overall length and width compared to the AFG. Smaller size allows for compatibility with a wider variety of rail systems, rail covers, and accessory mounts. Made in U.S.A.

Magpul AR15 5.56 NATO Standard 3 Pack Black When installed on the base of a rifle or subgun magazine, the Magpul provides unsurpassed speed and controllability during high stress, tactical magazine changes. Durable thermoplastic loop with recessed rough gripping surface. Quick and easy installation and removal. Patended design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide

The MagPul BAD (Battery Assist Device) extended bolt catch attaches to the standard AR15 bolt catch with a backplate and screw, making for easy installation with zero permanent gun modifications. The BAD features a thin, low profile to help minimize snagging, yet offers lightning fast reloads by allowing the bolt catch/release to be engaged using the trigger finger within the trigger guard. . NOTE: The BAD is compatible with all standard, mil-spec forged AR15 upper/lower receivers, as well as HK416, Vltor VIS/MUR, Larue Stealth, and many other billet upper/lower combinations. It is NOT compatible with LR-308, SR-25, AR-10 or other .308 AR-style platforms. . Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms . All mounting hardware included.

The Magpul Gen III Self Leveling Follower is a drop in replacement for the current issue USGI 30 round magazine follower. For 5.56mm / .223 Enhanced design features a patent pending 4-way anti-tilt design. 2% Teflon additive for self lubrication. Made in U.S.A.

The Magpul Enhanced Self-Leveling Follower is a drop in replacement for the aluminum USGI 30-round magazine black or green follower. Featuring a patent pending 4-way anti-tilt design for increased feeding reliability, the Enhanced Self-Leveling Follower is made from a non-hygroscopic and self-lubricating polymer. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product

The Enhanced Trigger Guard is a drop in replacement for the AR-15 / M16 / M4 weapons platform. Features a shallow "V" shape for better use of gloves in tactical shooting or winter operations. The Enhanced Trigger Guard has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Black Aluminium Made in U.S.A.

Magpul MBUS Pro LR Adjustable Sight Rear MAG527

The Magpul MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs. This update to the original MIAD has improved strap retention and also comes standard with the newest grip core that holds an included 1/2 oz. lubrication bottle. Two sizes are available- this TYPE 1 Kit (MAG520) fits most 5.56x45 and 7.62x51 AR receivers and the TYPE 2 Kit (MAG521) which is required for some 7.62x51 size receivers*. All mounting hardware is included. Made in U.S.A. ITAR International Traffic in Arms Regulations Controlled Product Features: Replacement for AR15/AR10 pistol-grip* Removable and replaceable front and rear straps for a custom fit over multiple hand sizes Improved ergonomics and positive anti-slip texture on both sides and rear back-strap The removable inner core holds a reusable 1/2 fl oz. lubrication bottle (oil not included) Custom waterproof storage of batteries (AA/AAA or CR123A) or spare bolt/firing pin (AR15/M4) is available with optional Storage Cores Each kit includes three backstrap sizes (S,M,L), two frontstraps (A1 and A2 style), lubrication bottle core, and dual-drive mounting screw Specifications: MIAD GEN 1.1 Grip Height, receiver to bottom: 4.0 in. Thickness, max: 1.2 in. NOTE: This TYPE 1 Kit fits AR15/M4's as well as many 7.62x51 variants such as the CMMG MK3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716. The TYPE 2 Kit uses taller backstraps for optimized fit with certain 7.62x51 receivers such as the Armalite AR-10A/B/T, DPMS LR308, KAC SR25, LaRue OBR, LMT .308 MWS, and S&W M&P10. Some additional 7.62x51 makes might require either the TYPE 1 or TYPE 2 Kit depending on the generation of the weapon and/or other considerations. In general, the TYPE 1 Kit will fit most all 7.62x51 AR lower receivers but there may or may not be a gap between the backstrap's 'beavertail' and the receiver. This gap is purely aesthetic and will not affect function.

The MOE Trigger Guard is an enhanced polymer drop in replacement for the AR-15 / M16 / M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. Black in color. All mounting hardward included. Made in the USA

The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15 M16 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional storage cores for gear stowage and includes a basic grip cap. All mounting hardware included. Made in U.S.A.